Click image to view full size image
M510
(Vinyl Mastic Roll, Heavy Duty Vinyl Plastic Electrical Tapes, Plyseal-V Vinyl Insulating Mastic (VM) Tape)
Description:
These tape rolls and precut pads are designed to insulate, moisture seal and pad all connections up to 600 volts, and have excellent resistance to abrasion, moisture, alkalies, acid, copper corrosion and varying weather conditions(including sunlight)
Polyvinyl chloride(PVC) backing
Compatible rubber mastic
Flexible over wide range of temperatures
Highly resistant to ultraviolet light
Easily installed to provide maximum protection
Compatible with all common solid dielectric cable insulation
Usable for indoor or outdoor applications
Applications:
Bolted connections
Service drops
Traffic signal wire connections
Lighting connections
Transformer bushing protection
Padding bolted connections on bus bar
Grounding rod connection protection
Terminal protection
Cable end sealing
Secondary compression connections
Technical properties:
Property |
Testing method |
Typical data |
Tensile strength |
ASTM D 2671 |
≥3.5MPa |
Elongation at break |
ASTM D 2671 |
≥200% |
Dielectric strength |
IEC 243 |
≥18kV/mm |
Dielectric constant |
IEC 250 |
3 |
Volume resistance |
IEC 93 |
≥1014Ω•cm |
Adhesive and self-amalgamation |
- |
Good |
Oxygen resistance |
- |
Pass |
Heat shock(105℃) |
- |
Pass |
Dimensions:
2mmX50mmX3000mm
Other sizes and packing are available on requested.
Related information:
The product is supplied as rolls of specified dimensions. Recommend to store in the original packing, protected from moisture, dust, heat and sunlight.
Molypoly is one of the best and leading vinyl mastic tape manufacturers and suppliers, who can bring you high-quality vinyl mastic tape from our professional factory. Customized service is also offered as you may need.
E-mail: 